NYLON RUNNER SAFETY RECALL NOTICE

VOLUNTARY PRODUCT RECALL FOR USER INSPECTION OF NYLON RUNNERS

Salt Lake City, Utah (February 4, 2016) - Black Diamond Equipment, Ltd. in cooperation with the U.S. Consumer Product Safety Commission (CPSC), voluntarily issued a recall, subject to user inspection, of 18mm Nylon Runners 60cm/24in (Style Number 380060) and 18mm Nylon Runners 120cm/48in (Style Number 380061) because of a possibility that the Nylon Runner is not load-bearing and will fail under standard use.

This recall concerns nylon runners with a manufacturing code of 2014 or 2015, which is found on the sewn in label.

This recall is due to a small number of Nylon Runners found to contain a tape splice, resulting in a product that is not load-bearing and will fail under standard use.

No accidents have been reported; however, in the interest of customer safety, Black Diamond has decided to voluntarily issue a recall, subject to user inspection.

Products Included In Recall:

This recall includes the manufacturing run of 18mm Nylon Runners in 60cm and 120cm lengths, produced with the manufacturing code tags 2014 and 2015. All colors are subject to this recall.

Nylon Runners 2014/2015

(All Colors)
18MM Nylon Runner 60CM
  • 380060

Nylon Runners 2014/2015

(All Colors)
18MM NYLON RUNNER 120CM
  • 380061

PRODUCT IDENTIFICATION:

Nylon Runners meeting all the following criteria are subject to this recall:

Dimensions:

18mm wide and 60cm (24in) or 120cm (48in) long (length is measured when the runner is lying flat).

COLOR:

Solid colors: Red, Blue, Gold, Green, Gray, and Purple.

CE Marking

CE0333, found on the sewn-in label.

MANUFACTURING CODE:

2014 or 2015, found on the sewn-in label.

PRODUCT INSPECTION:

If your Nylon Runners match the above specifications, please inspect the full length of each runner for the presence of masking tape similar to the images below:

*
IF NO MASKING TAPE IS PRESENT
OK
Do not return to Black Diamond.
OK
If Masking Tape Is Present:
DO NOT USE
Return To Black Diamond
RETURN

Questions? Please consult the Frequently Asked Questions (FAQ)

If, after inspection, you have any doubt as to whether your nylon runner is defective, please contact the Black Diamond Warranty Department at runnerrecall@bdel.com or 800-775-5552

Return Procedure:

  1. Immediately stop using your Nylon Runner.
  2. Click here to submit a recall request.
  3. Take note of your recall case number. A Black Diamond warranty representative will respond with the following information within two business days:
    • A return authorization number
    • An address for return
    • A free shipping label
  4. Return the Nylon Runner to Black Diamond.
  5. Black Diamond will send you a replacement Nylon Runner free of charge.

Questions? Please consult the Frequently Asked Questions (FAQ)

If, after inspection, you have any doubt as to whether your nylon runner is defective, please contact the Black Diamond Warranty Department at runnerrecall@bdel.com or 800-775-5552

RECALL DETAILS | FAQ | runnerrecall@bdel.com | 800-775-5552

Loading...